Lake Christine, CO - Wildfire Overview - 22 July 2018 c. 0315 UTC Weather Conditions - The vicinity of the fire had moderate to heavy cloud cloud cover. Details - Weather conditions had a large effect upon analysis, as the largest percentage of the most active fire portion of the fire was hidden by cloud cover Heavy were present over the most of the fire fire. The many segments perimeter are indicated as estimated perimeterm and the areas of intense and scattered were hidden and are larger than the area that was mapped or symbolized by the map. Large areas of perimeter growth and intense fire were detected at the northern and northeastern section of the Lake Christine fire. Located on the northern flank of Basalt Mountain approaching Cattle Creek. Large areas of intense fire were detected along the northeastern section of the permiter of the fire. Advancing on the northern flank of Basalt Mountain approaching Cattle Creek. Large areas of scattered fire were detected along the northern and northeastern sections of the perimeter of the fire. Advancing on the northern flank of Basalt Mountain and moving towards Cattle Creek. The scatter fire mapped in the central portion of the perimeter is more widely scattered type fire. Isolated fires were generally within fairly close proximity to the main perimeters, along the north and northeastern sections of the perimeter - spotting ahead of the intense fire locations on north and northereastern perimter. Ioslated fires were also mapped outside of the perimeter on the eastern edge of the perimeter. Isolated fire was located inside the central portion of the perimter. No isoalted or scattered fire was mapped on the southen section of the fire. Acreage - Estimated Acreage: 10,267 - but this estimate is low due to cloud cover over the most active protion of the fire on the north section of the pereimter. Acreage Change (if any): + 603 Data Conversion - Aircraft3 data is in WGS84, degree decimal, shapefile. To convert to NAD83: Using Toolbox in ArcMap, use WGS_1984_1 (AK, CONUS) as the "Geographic Transformation (optional)" To convert to NAD27: Using Toolbox in ArcMap, use WGS_1984_4 (Mean for CONUS) as the "Geographic Transformation (optional)"